esd diodes 1 publication date: n ovember 2004 ske00021aed mazmxxxh series silicon planar type for surge absorption circuit features ? four elements anode-common type ? power dissipation p d : 150 mw absolute maximum ratings t a = 25 c unit: mm parameter symbol rating unit power dissipation * p d 150 mw junction temperature t j 150 c storage temperature t stg ? 55 to + 150 c common electrical characteristics t a = 25c 3c note) * :p d = 150 mw achieved with a printed circuit board. parameter symbol conditions min typ max unit zener voltage * v z i z specified value v zener rise operating resistance r zk i z specified value ? zener operating resistance r z i z specified value ? reverse current i r v r specified value a 1.60 0.05 0.55 0.05 1.00 0.05 0.20 0.05 0.10 0.03 54 123 1.60 0.05 1.20 0.05 1.20 0.05 1.60 0.05 5 0 0.01 5 (0.15) refer to the list of the electrical characteristics within part numbers internally connected circuit 3 5 2 1 4 note) 1. measuring methods are based japanese industrial standard jis c 7031 measuring methods for diodes. 2. electrostatic breakdown voltage is 10 kv test method: iec1000-4-2 (c = 150 pf, r = 330 ? , contact discharge: 10 times) y 3. * : the temperature must be controlled 25c for v z mesurement. v z value measured at other temperature must be adjusted to v z (25c) v z guaranted 20 ms after current flow. 1 : cathode 1 4 : cathode 3 2 : anode 1, 2, 3, 4 5 : cathode 4 3 : cathode 2 ssmini5-f1 package
mazmxxxh series ske00021aed 2 MAZM062H 5.8 6.2 6.6 5 0.2 4 50 100 6.2z mazm068h 6.4 6.8 7.2 5 0.1 4 30 60 6.8z mazm082h 7.7 8.2 8.7 5 0.1 5 30 60 8.2z mazm100h 9.4 10.0 10.6 5 0.05 7 30 60 10z mazm120h 11.4 12.0 12.7 5 0.05 9 30 80 12z electrical characteristics within part numbers t a = 25c 3c v z (v) i r ( a) r z ( ? )r zk ( ? ) i z v r i z = 5 ma i z = 0.5 ma min nom max (ma) max (v) max max part number marking symbol zener voltage zener operating resistance reverse current (dc) p d ? t a i z ? v z i f ? v f r z ? i z s z ? i z c t ? v r 10 ? 3 468101214 10 ? 2 10 ? 1 1 10 10 2 zener voltage v z ( v ) zener current i z ( ma ) t a = 25 c mazm120h mazm100h mazm082h mazm068h MAZM062H 0 0 250 200 150 100 50 50 100 150 200 250 ambient temperature t a ( c ) power dissipation p d ( mw ) cu foil t = 0.035 mm 10 mm 0.8 mm 10 mm 10 ? 2 0 0.4 0.8 1.2 10 ? 1 1 10 10 2 forward voltage v f ( v ) forward current i f ( ma ) t a = 25 c 10 ? 1 1 10 10 2 zener operating resistance r z ( ? ) 11010 2 zener current i z ( ma ) t a = 25 c mazm082h mazm100h mazm068h mazm120h MAZM062H 0 12 10 8 6 4 2 0 102030405060 zener current i z ( ma ) temperature coefficient of zener voltage s z ( mv / c ) t a = 25 c to 150 c mazm082h mazm068h MAZM062H mazm100h mazm120h 0 10 0 20 4812 30 terminal capacitance c t ( pf ) reverse voltage v r (v) t a = 25 c mazm068h MAZM062H mazm082h mazm100h mazm120h zener rise operating resistance
request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technical information described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. it neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) the products described in this material are intended to be used for standard applications or general elec- tronic equipment (such as office equipment, communications equipment, measuring instruments and house- hold appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus- tion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (5) the products and product specifications described in this material are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifica- tions satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maximum rat- ing, the range of operating power supply voltage, and heat radiation characteristics. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. 2003 sep
|
